It’s never been easier to turn one room into two. Functionality meets minimalist design in a solution that effortlessly integrates with your existing style.

This wall kit comes with everything you need for an easy installation. No floor or ceiling drilling required. Simply attach the included mounting brackets to your existing walls, and fasten the assembled wall kit to the mounting brackets for a secure installation.

Choosing the right size is the most important step in ensuring a seamless integration of our partitions into your space. Follow these simple guidelines for the best results:

1. Measure Your Ceiling Height: It's essential to measure your ceiling height before making your purchase. Make sure it's at least 2" higher than your desired partition. For instance, for an 8' partition, an 8'2" ceiling height is ideal. This provides ample space for assembly and installation.

2. Check Your Floor: Ensure your floor is level, as any unevenness—like dips or bulges—could affect the setup.

The following measurements are only necessary for mounted straight walls and T-shaped wall kits:

3. Wall-to-Wall Width: The included wall mounting brackets measure 3"x3", allowing you about 2" of wiggle room (1" on each side) when determining your wall width.

For context, if you're considering a 138" wall kit, your space's wall-to-wall width should fall between 138"-140".

4. Floor Width: Ensure the width of your room along the floor, from the inside of one baseboard to the other, matches or exceeds the width of the wall kit you're thinking of purchasing.

As an example, for a 138" wall kit, your baseboard-to-baseboard span should be at least 138".

Please make sure you double-check your measurements to ensure a seamless fit. If you ever encounter challenges, our team is here to assist and guide you, but getting the right size is essential for an easy installation

Not sure about your measurements? Don’t find the size you need? Contact us, and our team will help you find a custom configuration that works for your space!

Wall Panels
3" thick wall panels crafted from Moisture and Impact Resistant Fiberglass. These panels are not only lightweight and sound-absorbing but also simple to maintain and clean. Assembly is straightforward, with panels easily snapping together using the included panel connectors, ensuring a stable and secure fit.

Accordion Door Kit(s)
Our 36" wide accordion door kit is tailored in heights of either 84" or 96", aligning with the height of the partition you opt for. Included is a specialized lintel, fitted with an integrated track for smooth door operation.

For installation, simply slide the folding door into the track, ensuring it's positioned between two panels. Once in place, the lintel and door are firmly locked using either lug or 2-way connectors. Each door boasts a double-sided handle, a pair of floor guides, and three integrated magnets to ensure a stable and secure closure.

Note that by default the door is positioned on the wall's width in the most economical position. If you have a special request for the door placement reach out to us, and we might be able to customize the kit to match your requirements (additional costs may apply).

2-Way and Lug Connectors
The two-way connectors interlock panels securely at the corners, while the panel lug connectors are essential for fastening stacked panels, ensuring stability from top to bottom.

Finishing Caps
To give your wall a polished, clean appearance, the kit comes with finishing caps to seal off exposed connector holes. Note that for walls taller than 6', finishing caps for the top are not included. Extra caps can be purchased from our Accessories page.

Wall Mounting Brackets (2-6*)
The Wall Mounting Brackets allow you to easily attach your new Wall Divider to your existing walls. Made of PVC, the bracket is designed to be strong yet flexible and easy to drill into. Simply drill two holes through the bracket into your wall, insert the included screws, nest the panels into the corner of the bracket, and add two more screws into the side of your panels. 

*1 included for each mounted end for 7ft tall walls and 2 included for each mounted end for 8ft tall walls.

Our modular wall kits are crafted for a seamless DIY experience. On average, a pair can set assemble and install our modular wall kits in under a few hours, with minimal tools.

Having a drill and/or screwdriver on hand is advisable for attaching the accordion doors and anchoring the wall kit to your existing walls.

Assembly Guides

• Modular Wall Kits Assembly Instructions.pdf
• Accordion Door Installation Instructions.pdf 
  

If you can't find the right size or are uncertain about the best fit for your space, reach out to us through live chat, email, or phone.

Our team of product and space design specialists are ready to help you find the right fit.

Get a custom quote

Shipping

• Modular Wall Kits ship out in 5-9 business days. Delivery usually occurs 2-3 weeks from the date of your order.

• Once your order has been shipped you will receive a tracking link(s), so you can follow the shipment straight to your door.

• The Modular Wall Kits are shipped via palletized freight services, complete with liftgate and curbside delivery. The local delivery partner will typically reach out to you 4-48 hours in advance to schedule a delivery timeframe that works for you. (Accessories for your kits will be delivered separately by regular parcel - see below)

• The delivery partner will lower your order on the pallets at the curb of your address and request a signature for the delivery. Bringing the panels indoors is your responsibility, as well as discarding of any packing materials, including the pallet(s). 

• Accessories for your Modular Wall Kits and cubicles (doors, desks, connectors, etc.) will be delivered as regular parcels, and will not require any signature. 

Returns

• We offer cancellations free of charge within 24 hours after placing your order. This is your window to make changes or cancel your order entirely. After this 24-hour period, a 20% restocking fee based on your total purchase amount will apply. If your order has already been shipped you will also be responsible for round-trip freight charges.

• For returns, we accept undamaged and unused products within 10 days of delivery. The return process will incur a 20% restocking fee and round-trip shipping costs. Once we have received and inspected the returned item, a refund will be processed to your original payment method.

The following items are considered final sale and are not eligible for return or exchanges:

• 1x1 Sample Panels
• Peel and Stick Wallpapers
• Add-On Accessories